Author Topic: incan mini tree model help  (Read 1656 times)

Offline Onesmoothhead

  • Newbie
  • *
  • Posts: 31
    • View Profile
    • ListentothelightsNM
incan mini tree model help
« on: November 26, 2015, 07:29:37 PM »
Hello all, I am struggling with building the model. Example: channel 1 green, channel 2 red, channel 3 white. I have multiple models and none seem to work in full. I now have custom models for each and only my red work. When I look at the node under each channel  in the sequence the red shows on, but the green shows off and white is showing off. All were set to be on for the time period. Any ideas or help would be great.  Kevin
http://nutcracker123.com/forum/index.php?topic=53.msg217#msg217

Offline jeffl

  • Full Member
  • ***
  • Posts: 146
    • View Profile
Re: incan mini tree model help
« Reply #1 on: November 26, 2015, 08:42:22 PM »
Are they placed so that the ones not showing are overlapping each other?  The other issue I have is copying I get the colors off or the channels numbers messed up.

Offline Onesmoothhead

  • Newbie
  • *
  • Posts: 31
    • View Profile
    • ListentothelightsNM
Re: incan mini tree model help
« Reply #2 on: November 26, 2015, 08:47:30 PM »
I do not have them over lapping and I have only the 3 channels testing.  Here is a screen shot of the sequence. 
http://nutcracker123.com/forum/index.php?topic=53.msg217#msg217

Offline jeffl

  • Full Member
  • ***
  • Posts: 146
    • View Profile
Re: incan mini tree model help
« Reply #3 on: November 26, 2015, 08:55:20 PM »
Something about the red colors on them I think is the issue.  Drop a white on effect on them instead of red.

Offline Onesmoothhead

  • Newbie
  • *
  • Posts: 31
    • View Profile
    • ListentothelightsNM
Re: incan mini tree model help
« Reply #4 on: November 26, 2015, 09:00:36 PM »
Jeffl, thank you so very much. I changed them to white and my test work. I think I am now heading in the correct direction.  I can not thank you enough.
http://nutcracker123.com/forum/index.php?topic=53.msg217#msg217

Offline jeffl

  • Full Member
  • ***
  • Posts: 146
    • View Profile
Re: incan mini tree model help
« Reply #5 on: November 26, 2015, 09:15:13 PM »
Just passing on what I received.  I would also try a color that matches the model color.  That also works but a color other than those two combinations doesn't.