Hi all, I've been running all rgb for a couple years now and used three F16v2s in my display this past Christmas, including one of them outputting DMX for some Ray Wu RGB Floods. This week I picked up a Lynx Express v5 controller off of diyla. I plugged in the LE and used a standard Cat5e cable from the Serial 2 Output of a F16v2 to the DMX In on the LE. I used the buttons on the LE to set the start channel to 001, made sure the serial output 2 start channel was set to 1 on the F16v2 (running version 1.04) and set up a single channel model in xLights with channel 1 (used type of string single color white). I turned on xLights output and tried both the On effect and the DMX effect but couldn't get the AC string plugged in to LE port 1 to light up. I tried the test pattern on the LE and I know the output works (AC light string turns on and off and blinks according to test pattern). I have other rgb lights hooked up to the F16v2 and can control them successfully. Thoughts?