Author Topic: LOR in DMX  (Read 2080 times)

Offline bobbert

  • Newbie
  • *
  • Posts: 30
    • View Profile
LOR in DMX
« on: November 29, 2014, 02:04:28 PM »
What and how to set up the lor boxes to run in xlights(DMX mode). Have done the cross cable at the first box but nothing plays from xlights. Have 5 LOR boxes and 1 E1.31 running rgb mega tree which runs fine.
Any help on this would be very helpful for time is running out.

Offline rando1957

  • Full Member
  • ***
  • Posts: 200
    • View Profile
Re: LOR in DMX
« Reply #1 on: November 29, 2014, 02:18:43 PM »
In the Xlights setup tab, you need to add the DMX network to your e131 network. For DMX, it asks for port and last channel.  I know this part, but what I don't know is if you have to do something in your LOR sequences before you convert them in XL.  I have that question on another post.
Randy McMasters
Graham, NC

Offline colonelcline

  • Full Member
  • ***
  • Posts: 121
    • View Profile
Re: LOR in DMX
« Reply #2 on: November 29, 2014, 02:27:25 PM »
Make sure to look at DMX-DOC.pdf on the LOR site.