Configuring chained models with different patterns

[tyczj]

I am sure this is probably just a configuration issue I am having but I have a Falcon F48 and on one of the ports I have 3 window models that I have all connected together sharing the same data/power connection. In xLights i have each window a different pattern and looks correct but when I output them to the actual controller they act as one long string and dont act independently.

I have the second window's channel start from the end of the first window and the third window's channel start from the end of the second.

I am not sure what I am doing wrong here, do I have to have each window on its own port to have them act independently?

[Gilrock]

You'll get better help if you post screenshots of everything relevant to the setup of these models in xLights and in the controller.

[tyczj]

Here is my network setup in xLights

https://photos.app.goo.gl/WiBihrChoRgxFonE6

This is how I have my first window setup and the rest start off the end (ie. second starts at the end of first and third starts at the end of the second)

https://photos.app.goo.gl/y53TPDd7ERwd2uXdA

When I upload the information to the F48 I have these settings

https://photos.app.goo.gl/RT3TXMXoC6TZSEUNA
https://photos.app.goo.gl/6N1jRsvGdkcpuKVq7

And finally this is how it should look as seen from xLights

https://photos.app.goo.gl/sjX8cihBTG6WcM3F7

I feel like I am missing something I just dont know what?

[poporacer]

I am just starting out with XLights so I could be wrong. A couple things. You have your Universes set up as 510 channels. On your first window you have the start channel as Universe 2 channel 511 (Absolute channel 1021)? Absolute Channel 1021 is actually Universe 3 channel 1.  On your port configuration, you have your single string start at channel 1 and your Window Frame starting at Channel 1. You have some overlapping channels here.

[Gilrock]

Yes he's right it looks like you are mixing notations.  If you use Universe/Channel notation then the first channel in universe 2 should be obtained with #2:1 not #2:511.  511 is the absolute channel number for universe 2 channel 1.