Author Topic: Mapping Issue?  (Read 393 times)

Offline Brent_455

  • Newbie
  • *
  • Posts: 1
    • View Profile
Mapping Issue?
« on: August 31, 2021, 02:38:01 PM »
First I feel like I should apologize for this question but I'm new to this and possible in over my head! But for some reason I have one pixel at the end of a string that will not show the color blue when I test the lights in xlights. Using the RGB test feature the whole string lights up red and green, then everything but the last pixel lights up blue. It's happening with my rgb flood lights as well, I have 3 chained together and the last one will not show blue. I used the auto layout and visualizer to set up my AlphaPix 4 controller. When I test the lights on the controller themselves they work just fine so I'm nor sure what I'm missing...

Offline jnealand

  • Hero Member
  • *****
  • Posts: 1421
    • View Profile
Re: Mapping Issue?
« Reply #1 on: August 31, 2021, 06:00:31 PM »
I know nothing about AlphaPix, but your missing blue is always the highest channel in your layout as described so I would be looking to see why you are 1 channel short.
Jim Nealand
Kennesaw, GA

Offline keithsw1111

  • Administrator
  • Hero Member
  • *****
  • Posts: 2733
    • View Profile
    • Kellyville Christmas Lights
Re: Mapping Issue?
« Reply #2 on: September 01, 2021, 04:41:37 AM »
With no pics or anything impossible to know but could it be a 511 vs 510 channels issue. Alphapix only supports 510 from memory.


Sent from my iPhone using Tapatalk