Sean Meighan
Welcome => Do You Need Help? Post it here => Topic started by: THurrle on August 17, 2015, 03:48:48 AM
-
When trying to convert a sequence it xlights gets to "reading the vixen sequence" and freezes. I have tried several sequences and am not getting results. Any help to correct this.
Thanks
Terry
-
What version of Vixen would be helpful.
-
Can u attach a small box file that doesn't work? We can see if we can duplicate the issue
Sent from my iPhone using Tapatalk
-
Also , are you converting into a data layer or using Import effects ?
-
Also , are you converting into a data layer or using Import effects ?
I am not sure what you are asking. I am just using one of my vixen 2.1 sequences and putting into the convert part of xlights.
-
Can u attach a small box file that doesn't work? We can see if we can duplicate the issue
Sent from my iPhone using Tapatalk
Sean I am not sure what a box file is but here is the sequence and profile if that will help
-
I am not sure what you are asking. I am just using one of my vixen 2.1 sequences and putting into the convert part of xlights.
Hi, Would you mind explaining the steps you are doing ?
For example - u create a new musical sequence , and move past screens a , b c etc.
Then Click on Settings, Sequence settings , Data layers and then Import ? then you select your file and then it hangs ?
-
Pretty sure that Sean's phone changed vix to box. A small vix file.
-
Double post from Tapatalk.
-
I am not sure what you are asking. I am just using one of my vixen 2.1 sequences and putting into the convert part of xlights.
Hi, Would you mind explaining the steps you are doing ?
For example - u create a new musical sequence , and move past screens a , b c etc.
Then Click on Settings, Sequence settings , Data layers and then Import ? then you select your file and then it hangs ?
I open XL, click on convert. choose file for for vixen sequence, put in that sequence, then for the output format I choose xlights and click convert. I am not creating or sequencing in xlights. I am converting vixen sequences to xlights.
-
What version of xlights are you using? Like Sean requested, you may need to post a small file, for example, just a few seconds of a sequence.
What is your goal for this? Perhaps we can tell you a better way. I tried a convert and it worked fine for me. It took 10 minutes, maybe just let it sit for a while.
-
Vixen files are one of the easiest formats to convert. It shouldn't take 10 minutes for a single file. That concerns me.
-
Well, it did. It took 30 seconds to read, 9 minutes for the write. This is 31000 channels.
-
Well, it did. It took 30 seconds to read, 9 minutes for the write. This is 31000 channels.
Not sure what you converted. The sequence I posted is 264 channels. Are you talking about something else here?
-
Well, it did. It took 30 seconds to read, 9 minutes for the write. This is 31000 channels.
Not sure what you converted. The sequence I posted is 264 channels. Are you talking about something else here?
Sorry, I didn't notice that you posted something. I converted something I had.
Yours converted in about 3 seconds, no issues.
What version are you using?
-
yours converted in less than one second, no issues.
you may have missed the discussion 6 months ago, xlights 4.0 does not use xseq files, we use fseq.
we kept xseq files for compatability.
Further, CONVERT will change your vixen file into a binary rendered fseq. thsi means if you ever need to modify it , you go back to vixen.
-
Well I think we do confuse people because if I remember correctly the convert dialog still lists XSEQ as Xlights sequences and FSEQ as Falcon Pi Player files. We really don't want people selecting the XSEQ option anymore. Is there a reason to leave that option in there now as a target format?
-
I had kind of left it in because at the time I didn't know if all the updates to the sequencer (OpenGl, etc...) would require us dropping support of the ancient versions of Windows that some folks use to run their shows. Being able to convert to a format that xLights 3 could play for running shows was something I thought would be a "safe" thing.
-
maybe we label it like this
*.xseq xLights 3.0
*.fseq xLights 4.0/FPP
?
-
Well, it did. It took 30 seconds to read, 9 minutes for the write. This is 31000 channels.
Not sure what you converted. The sequence I posted is 264 channels. Are you talking about something else here?
Sorry, I didn't notice that you posted something. I converted something I had.
Yours converted in about 3 seconds, no issues.
What version are you using?
Vixen is 2.1 xlights /nutcracker is the latest version.
-
Sean and I both converted your file fine. Where are the files you want converted located, are they in the sequence folder?
-
Also, why are you wanting them converted? We might be able to save you some headache and steps.
-
Sean and I both converted your file fine. Where are the files you want converted located, are they in the sequence folder?
They are in my vixen sequence folder. I am running my show in xlights this year unless I get the Raspberry PI to work for me. So far not getting anywhere with that.
-
Same result with FSEQ
-
It sounds like everyone else was able to convert it. Couldn't one of you just give the converted file back? :)
-
I was going to suggest using a data layer, seems like a better option.
-
I believe I can use the fseq now. I rewrote the sequence in visxen using copy and past and it converted with a new profile. I can not understand why you guys can do it and can not. I was able to get the pi to boot up and connect to the IP address by hard wiring it from the pi to the wifi extender I have. I can always just run a cat 65 out to the pi outside and get things going in a pinch. I am not real savvy on networking and how to set up another wireless router to run the show that way. I know some of you know this stuff like the back of your hand but when it comes to this stuff I am a little challenged. Now to figure out how to set up the show and get it running, play lists schedule etc. I am working on it however. Not sure how to set up transmitter. I have an FM02. I only see the 212 in the drop down box.
Thanks for the input.
Terry
-
Update
I kept messing with my PI and now have it working wireless. I can take it across the street and power up and get the FPP web page. Now I just have to figure out how to get the sequences and scheduler done. I am as I said watching the videos from Expo so I should get it done. I will also watch Seans videos on xlights
he did at Expo and see where it goes. I still have to connect a renard controller and get it working with the PI. I think I can get it all done before Thanksgiving and get two shows put together.
-
Hi,
Have been through all of that quite recently.
Do one step at a time.
Post your questions here and I can respond quite quickly (I struggle to find stuff in fb)- am sure others will respond as well.
Is your first qn - how do you get your sequences to the PI ?
If so , use the file manager , browse to your xl show directory and upload the Yoursequence.fseq and the mp3 . (the xml is not required)
Then on the content tab , create a playlist and add the fseq (and the mp3) as the first item,
(Optionally )Test using the Display testing tab , that the fseq runs ,
Then test running the playlist from the status page.
Add another fseq/mp3 to the playlist etc
Note: Connect your PC/laptop to the Ethernet port of the PI via a switch/router (I did not try without that) if possible to upload your sequences as it would be faster.
-
Hi,
Have been through all of that quite recently.
Do one step at a time.
Post your questions here and I can respond quite quickly (I struggle to find stuff in fb)- am sure others will respond as well.
Is your first qn - how do you get your sequences to the PI ?
If so , use the file manager , browse to your xl show directory and upload the Yoursequence.fseq and the mp3 . (the xml is not required)
Then on the content tab , create a playlist and add the fseq (and the mp3) as the first item,
(Optionally )Test using the Display testing tab , that the fseq runs ,
Then test running the playlist from the status page.
Add another fseq/mp3 to the playlist etc
Note: Connect your PC/laptop to the Ethernet port of the PI via a switch/router (I did not try without that) if possible to upload your sequences as it would be faster.
Thanks will try all that this weekend. I should have a bit of time.
Terry
-
Hi,
Have been through all of that quite recently.
Do one step at a time.
Post your questions here and I can respond quite quickly (I struggle to find stuff in fb)- am sure others will respond as well.
Is your first qn - how do you get your sequences to the PI ?
If so , use the file manager , browse to your xl show directory and upload the Yoursequence.fseq and the mp3 . (the xml is not required)
Then on the content tab , create a playlist and add the fseq (and the mp3) as the first item,
(Optionally )Test using the Display testing tab , that the fseq runs ,
Then test running the playlist from the status page.
Add another fseq/mp3 to the playlist etc
Note: Connect your PC/laptop to the Ethernet port of the PI via a switch/router (I did not try without that) if possible to upload your sequences as it would be faster.
Thanks will try all that this weekend. I should have a bit of time.
Terry
Well weekend was filled with honey do's. Getting ready for a vacation in the next few weeks. I did not get to play with the PI but did get a chance to get projector set up and test a video on the PC to check the masking. Perfect. Plan to get PI tested this week I hope. Pretty full schedule next 2 weeks with Dr. appointments and a biopsy.
Terry
-
All the best with the Dr Terry,
Are u planning on taking your laptop and PI on your vacation ?
I probably would have.... :)
-
All the best with the Dr Terry,
Are u planning on taking your laptop and PI on your vacation ?
I probably would have.... :)
Gerry,
Thanks for the kind thoughts. Hoping things are ok.
Probably wont take it. My lap top is an old XP laptop. We will have a week that is pretty filed up so won't have much time for sequencing etc. I couldn't access my router anyway but could most likely access the wifi there. Just won't have a lot of time.