Messages

1

Do You Need Help? Post it here / Re: How to set dimming curves

« on: December 02, 2017, 08:02:35 PM »

When I make my own dimming curves in xLights do I need to upload those to the FPP scheduler myself or does that upload automatically? I'm running a Raspberry Pi with FPP 1.8 installed

If I have to upload it myself, could someone point me as to where I load it to?

Thanks.

2

Bugs in xLights/Nutcracker / Re: Mouse clicks slightly to the left in 2017.39

« on: December 02, 2017, 07:18:59 PM »

It's not on a retina display. I'll have to take a closer look to see if it happens on anything other than the sequencer area of the display. I'll get back with an update on that after the weekend.

3

Bugs in xLights/Nutcracker / Mouse clicks slightly to the left in 2017.39

« on: December 01, 2017, 01:08:20 AM »

Hello,

I've found when I click a panel in the sequencer the mouse will click slightly to the left of the cursers pointer.

I'm using Mac OS X version 2017.39

I've attached a video showing the issue. It's only a small issue but I figured I should mention it.

Thanks.

4

Bugs in xLights/Nutcracker / Re: 2017.37 (OSX) Colours not displaying on visualizer

« on: November 20, 2017, 12:10:13 AM »

Awesome, I'm glad to hear that

I happened to find one other string that had the same issue so I made another video that shows more of the settings. I believe you are probably correct on the issue but I'll let you be the judge. Hopefully I got all the info that you need in this one...

5

Do You Need Help? Post it here / Re: How to set dimming curves

« on: November 19, 2017, 11:22:04 AM »

Those two dinning curves work pretty well for everything I have right now. I'm only using AC LED lights and high wattage incandescent bulbs. If others have different profiles feel free to post them it could be helpful for others to be able to pick from a selection to see what works best for them.

6

Bugs in xLights/Nutcracker / 2017.37 (OSX) Colours not displaying on visualizer

« on: November 19, 2017, 03:37:49 AM »

I've noticed since updating to (OSX version of) 2017.37 that I need to go to the Layout and change specific models colour to "Apple" colours because they do not display on the visualizer screen otherwise. I haven't had to do this to all models, only some. I've looked through the settings of the models and they all seem to be consistent with the others. It wasn't until I changed the colour to an "Apple" colour that the issue corrected. This hasn't caused any crashes and I don't know if it would cause the controller channel to appear as unresponsive, I haven't gotten that far into sequencing yet since I'm still just dumping the ideas into the sequencer right now.

I've attached the video and .xml for reference

Thanks

7

Do You Need Help? Post it here / Re: How to set dimming curves

« on: November 18, 2017, 12:27:12 AM »

This is the Incandescent 120VAC 100Watt Flood light profile that I am working on. It still has a slight delay when being used as a slow ramp up but its a huge improvement from the default 0-100% profile.

This will provide a profile range to operate between 21.5-90% brightness with a linear profile shape.

0
55
56
56
57
58
58
59
60
60
61
62
63
63
64
65
65
66
67
67
68
69
69
70
71
71
72
73
73
74
75
76
76
77
78
78
79
80
80
81
82
82
83
84
84
85
86
87
87
88
88
89
90
91
91
92
93
93
94
95
95
96
97
97
98
99
100
100
101
102
102
103
104
104
105
106
106
107
108
108
109
110
110
111
112
113
113
114
115
115
116
117
117
118
119
119
120
121
121
122
122
123
124
124
125
126
126
127
128
128
129
130
130
131
132
132
133
134
134
135
136
137
137
138
139
139
140
141
141
142
143
143
144
145
145
146
147
147
148
149
150
150
151
152
152
153
154
154
155
156
156
157
158
158
159
160
160
161
162
163
163
164
165
165
166
167
167
168
169
169
170
171
171
172
173
174
174
175
176
176
177
178
178
179
180
180
181
182
182
183
184
184
185
186
187
187
188
189
189
190
191
191
192
193
193
194
195
195
196
197
197
198
199
200
200
201
202
202
203
204
204
205
206
206
207
208
208
209
210
210
211
212
213
213
214
215
215
216
217
217
218
219
219
220
221
222
223
224
225
226
227
228
228
229
230
230

8

Do You Need Help? Post it here / Re: How to set dimming curves

« on: November 17, 2017, 10:24:17 PM »

It doesn't explain in the manual what language to use when creating a .txt file.

We read the numbers best in English.

LOL, thats good because I can never remember what order to put them in when speaking a different language.

9

Do You Need Help? Post it here / Re: How to set dimming curves

« on: November 17, 2017, 10:08:49 PM »

Thanks for the help! I'll post my results as I figure them out. For now, I've found this to be a reliable dimming profile for multiple different brands of 120VAC LED lights (various hardware store brands that are not full wave rectified or "rated for dimming"). This will provide full off at 0% dim level and when 1% dimming is selected it will jump up to an actual 12% dimming level to provide the faintest of glow so there is no delay between the sequence and the true visual that is produced. This will also cap the dimming at 90% because I found no noticeable difference in brightness which also appeared as a delay when watching the live show. This will produce a linear profile.

0
0
30
32
32
33
34
35
35
36
37
38
39
39
40
41
42
43
43
44
45
46
47
47
48
49
50
50
51
52
53
54
54
55
56
57
58
58
59
60
61
62
62
63
64
65
65
66
67
68
69
69
70
71
72
73
73
74
75
76
77
77
78
79
80
80
81
82
83
84
84
85
86
87
88
88
89
90
91
92
92
93
94
95
96
96
97
98
99
99
100
101
102
103
103
104
105
106
107
107
108
109
110
111
111
112
113
114
114
115
116
117
118
118
119
120
121
122
122
123
124
125
126
126
127
128
129
129
130
131
132
133
133
134
135
136
137
137
138
139
140
141
141
142
143
144
144
145
146
147
148
148
149
150
151
152
152
153
154
155
156
156
157
158
159
159
160
161
162
163
163
164
165
166
167
167
168
169
170
171
171
172
173
174
175
175
176
177
178
178
179
180
181
182
182
183
184
185
186
186
187
188
189
190
190
191
192
193
193
194
195
196
197
197
198
199
200
201
201
202
203
204
205
205
206
207
208
208
209
210
211
212
212
213
214
215
216
216
217
218
219
220
220
221
222
223
223
224
225
226
227
227
228
229
230
231

I've posted the numbers because I find after a few years files go missing from forum servers. This way people can copy and paste the numbers into their own .txt file as they wish. I'll also attach a copy of my .txt file because its easy to do and may help others out in the short term.

10

Do You Need Help? Post it here / Re: How to set dimming curves

« on: November 16, 2017, 11:05:55 PM »

It doesn't explain in the manual what language to use when creating a .txt file.

For instance it's not clear if it should be written like this...

1=0
2=30.72
3=31.21
4=31.71
5=32.20
...etc...
100=230.40

or if it should read like this...

0
30.72
31.21
31.71
32.20
...etc...
230.40

Or are decimals rounded to only one place acceptable, or something completely different. it's a slow process to calculate this out and list it so insight would save some legwork if I'm headed in the wrong direction here

thanks

This is what I've tried this far (in a .txt file) but it still doesn't produce the profile that I'm looking for...

0.00
12.00
12.31
12.62
12.93
13.24
13.55
13.86
14.17
14.48
14.79
15.10
15.41
15.72
16.03
16.34
16.65
16.96
17.27
17.58
17.89
18.20
18.51
...
...
 (Removed section of numbers because this method was incorrect and it made the post excessively long. I left enough so that others can see how i went wrong so they can avoid the same mistake)
...
...
85.16
85.47
85.78
86.09
86.40
86.71
87.02
87.33
87.64
87.95
88.26
88.57
88.88
89.19
89.50
89.81
90.12
90.43
90.74

Its good because it brought the starting point up off of zero, but the problem i've found is that the top end is showing as around 30%

Upon testing this profile I've found that even though the profile shows at around 12% on the lower end, when tested, the string doesn't start to illuminate until around 24% now.

Any ideas as to how I can produce the profile I'm looking to achieve?

I've attached a screen shot of the profile that i see when i upload the .txt file

11

Do You Need Help? Post it here / Re: How to set dimming curves

« on: November 16, 2017, 12:19:23 AM »

I'm feeling under the weather so I won't get to it tonight unfortunately. I hope to setup the test rig again and play with it some more tomorrow. Just playing around with it on the computer It looks like it still has a delay at the beginning even if I put Gamma to something extreme like 0.3. I know that setting up the test rig is the only way to really see what effect it has on the lights but through the virtualizer it looks like I can trim the top end by using Brightness but I can't trim the bottom end with Gamma. Gamma seems to only provide curve to the whole profile but always maintains its zero point at 0.

I've found a Linear profile works well with my lights so it looks like I may have to figure out this spread sheet option to get a Linear profile while manually creating top end and bottom end Trim adjustment. I'll have another look through the manual to see if there is an example of how this will look on a spreadsheet.

Thanks.

12

Do You Need Help? Post it here / How to set dimming curves

« on: November 15, 2017, 01:49:55 AM »

I've found when dimming my 120VAC LED light strings they don't start to illuminate until the dimming level reaches 12%, and after 90% they are no longer visually brighter. This causes a visual lag in my sequences even though they are timed correctly.

I see there is a dimming curve adjustment that can be used to control brightness and Gamma, Is there a way to set the responsive dimming values so that the sequencer only uses the values between what I've specified above? If this is not possible then can someone post their dimming curve values for their big box store lights that might get me close to what i'm looking to achieve? I haven't been able to find a way to do this yet in the dimming curve settings.

Thanks

13

Bugs in xLights/Nutcracker / 2017.31 mac 64bit crashes upon exit of AC mode

« on: October 24, 2017, 12:12:29 AM »

I can't really explain it other than it only happens when I drag this effect to the end of the song. the effect that I chose is not inputed correctly so when I exit out of AC mode it crashes. It happens consistently. I'm aware I'm not using the latest version so I'll try updating to the latest version and report back if it happens in that as well.

14

Bugs in xLights/Nutcracker / Re: 2017.31 MAC, Mouse Capture Error causes crash. *Update*

« on: October 10, 2017, 12:07:44 PM »

Blocking the delete key would save others from going through the same confusion as me. That would be a good solution to this issue if it was applied.


Sent from my iPhone using Tapatalk

15

Bugs in xLights/Nutcracker / Re: 2017.31 MAC, Mouse Capture Error causes crash. *Update*

« on: October 10, 2017, 12:06:12 PM »

LOL, if there's a way to screw things up then you can trust me to find it!

That being said, It seems to work great when used as it was intended.


Sent from my iPhone using Tapatalk