Messages

1

Bugs in xLights/Nutcracker / Re: Bug Report Effect on time line crashes app if adjusted to the right

« on: December 14, 2017, 05:03:58 PM »

I find the thread for it... Its kind of holding me up on sequencing.

2

Bugs in xLights/Nutcracker / Bug Report Effect on time line crashes app if adjusted to the right

« on: December 14, 2017, 12:34:14 PM »

Bug Report Effect on time line crashes app if adjusted to the right... Xlights version .41 running on Windows 7 Ultimate.

When ever i add an effect to the sequence and adjust the duration to the right the application crashes... It works fine if I adjust it to the left...

Attached is the dump file and a JING video of the recreation.

3

General Software / Re: Issue with 2 strings of lights that make up one line on door

« on: December 15, 2016, 05:24:41 PM »

That did the trick... THANK YOU 

4

General Software / Re: Issue with 2 strings of lights that make up one line on door

« on: December 15, 2016, 12:36:37 PM »

I will try that... Let you know how it turns out. 

5

General Software / Re: Serial Transmit overlflow errors

« on: December 15, 2016, 12:22:55 PM »

I do not have issues with running X-Lights in windows 7 professional.  i am running version 2016.51 "Production" release of X-Lights.

6

Enhancement Requests / Picture - Effects Assist grid resize

« on: December 15, 2016, 12:19:33 PM »

The ability to resize the grid in effects assist for pictures. The grid is coupled to the model size and does not allow for the creation of larger pictures. Also the grid squires could be smaller if possible.

7

General Software / Re: Issue with 2 strings of lights that make up one line on door

« on: December 15, 2016, 10:27:41 AM »

They are both straight line models (2) of them with the starting point in the middle (green dot) One goes up and one down.

The line that goes up from the center is the starting point for universe 1 and the one that goes down is the starting point for universe 2

See attachment

8

General Software / Issue with 2 strings of lights that make up one line on door

« on: December 15, 2016, 12:49:06 AM »

I'm having an issue with effects. I have 2 strings of lights that make up one line on door.

one string of lights starts and travels up the door. the second string starts and travels down the door.

I created a group (door Left) and added the first (Door Left 1) and second (Door left 2) segments.  when i add "BARS" effect or "Single Strand" effect to the Door Left group the effect travels in different directions. I change one of the segments (Door left 1) setting to left and it has no effect of the direction. Any ides?

9

Do You Need Help? Post it here / Re: NEW to Xlights - Trying to setup a 7x21 matrix

« on: December 13, 2016, 08:25:24 PM »

SOLVED:

Solution:

Controller setup:
Output 3: DMX start universe: 3 , DMX Start channel 1, Pixels connected: 100, Null ; 0, zig: 0, intensity:100
Output 4: DMX start universe: 4 , DMX Start channel 1, Pixels connected: 47, Null ; 0, zig: 0, intensity:100

Xlights matrix setup:
direction: Horizontal
Strings: 1
nodes: 147
strands: 7
Start location: Bottom right

Xlights Setup Tab:
Universe: 3, number channels: 300
universe: 4, number channels: 141

10

Do You Need Help? Post it here / NEW to Xlights - Trying to setup a 7x21 matrix

« on: December 13, 2016, 06:46:04 PM »

I am using an alphaPix4 controller and am tring to setup a 7x21 matrix. Right now it is all jumbled. There are 1 strand off 100 on output 3 and 1 strand of 47 on output4. The lights run from the bottom right horizontally back and forth.

Controller setup:
Output 3: DMX start universe: 3 , DMX Start channel 1, Pixels connected: 100, Null ; 0, zig: 0, intensity:100
Output 4: DMX start universe: 3 , DMX Start channel 301, Pixels connected: 47, Null ; 0, zig: 0, intensity:100

Xlights matrix setup:
direction: Horizontal
Strings: 1
nodes: 147
strands: 7
Start location: Bottom right

Any ideas?