Author Topic: Missing elements on House preview when played  (Read 3100 times)

Offline Gilrock

  • Supporting Member
  • Hero Member
  • *
  • Posts: 6946
    • View Profile
Re: Missing elements on House preview when played
« Reply #15 on: June 08, 2017, 11:34:41 AM »
What I meant was click on the name of one of your existing models in the list then down in the size panel make sure the numbers aren't all 0.

Offline jerrywolfer

  • Jr. Member
  • **
  • Posts: 69
    • View Profile
Re: Missing elements on House preview when played
« Reply #16 on: June 08, 2017, 11:42:26 AM »
Gilrock, thanks for sticking with me here.
They are all "zeros" no xy data
I have not idea how they got zeroed out.

Offline Gilrock

  • Supporting Member
  • Hero Member
  • *
  • Posts: 6946
    • View Profile
Re: Missing elements on House preview when played
« Reply #17 on: June 08, 2017, 11:44:00 AM »
So you should be able to change the value which will give the models some width and move them closer to the middle and then you can drag them back into position.

Offline jerrywolfer

  • Jr. Member
  • **
  • Posts: 69
    • View Profile
Re: Missing elements on House preview when played
« Reply #18 on: June 08, 2017, 12:01:22 PM »
Yes that works.
When play no flashing?
cockpit issue here?

Offline jerrywolfer

  • Jr. Member
  • **
  • Posts: 69
    • View Profile
Re: Missing elements on House preview when played
« Reply #19 on: June 08, 2017, 12:09:17 PM »
Lights flashing works, yah cockpit trouble here.
If I find a RGBeffecs.xml that has x/y I could copy and past that to the model I'm using?

update:
what started this whole issue was I'm adding 12 DMX RGB 20W floodlights to my model.
Can I just use the "create new dmx" device, but only program it to 3 channels?
I see that the device has only Moving heads with a lot of options.
thanks for your time, very educational.
« Last Edit: June 08, 2017, 12:14:55 PM by jerrywolfer »

Offline Gilrock

  • Supporting Member
  • Hero Member
  • *
  • Posts: 6946
    • View Profile
Re: Missing elements on House preview when played
« Reply #20 on: June 08, 2017, 12:42:35 PM »
If it's just a DMX flood you don't want to use the DMX model because they don't need any special behavior.  Just create a single line model then set to 1 light.  You can change appearance and make it larger with transparency.  Choose "3 channel RGB" for the string type and that will work fine for DMX.

Offline jerrywolfer

  • Jr. Member
  • **
  • Posts: 69
    • View Profile
Re: Missing elements on House preview when played
« Reply #21 on: June 08, 2017, 01:43:30 PM »
The x/y idea really helped since it was easy to do.
I really didn't know I could do it that way.
Thanks again for helping, I will give the DMX ago here.