« previous next »
Pages: [1]   Go Down

Author Topic: Ferris Wheel project  (Read 2688 times)

Offline babybear

  • Hero Member
  • *****
  • Posts: 540
  • Here to make everyones show better
    • View Profile
Ferris Wheel project
« on: February 14, 2017, 08:14:04 PM »
I started building my Ferris Wheel  its just over 6 feet tall with 10 carts. at the end it will have 600 ws2812b lights. Here is a quick video of it in the light and dark. Just started to put on the lights.
  https://youtu.be/vTWVXz0yJBo
Logged
JimmyG
Rochester, New York

Offline deanathpc

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: Ferris Wheel project
« Reply #1 on: February 17, 2017, 09:01:36 AM »
O.K. I'll be the first to comment!  That is pretty cool!
Logged

Offline babybear

  • Hero Member
  • *****
  • Posts: 540
  • Here to make everyones show better
    • View Profile
Re: Ferris Wheel project
« Reply #2 on: February 17, 2017, 10:41:21 AM »
The nice part about this project it is all scrap but lights, slip coupler and motor.  A bit of time here but its Winter what else is there to do. By the end of this weekend all the lights will be on. 
Logged
JimmyG
Rochester, New York

Offline deanathpc

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: Ferris Wheel project
« Reply #3 on: February 17, 2017, 06:29:08 PM »
That is awesome!  Nice work!
Logged

Offline babybear

  • Hero Member
  • *****
  • Posts: 540
  • Here to make everyones show better
    • View Profile
Re: Ferris Wheel project
« Reply #4 on: February 19, 2017, 05:44:17 PM »
finely got 600 ws2812b LEDs mounted and all working.   34 per spoke 10 spokes.  260 on the outer ring.
Logged
JimmyG
Rochester, New York

Offline deanathpc

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: Ferris Wheel project
« Reply #5 on: February 21, 2017, 12:47:08 PM »
Alright you will have to show this off on Sunday!!!!!
Logged

Offline Skunberg

  • Newbie
  • *
  • Posts: 12
    • View Profile
Re: Ferris Wheel project
« Reply #6 on: March 01, 2017, 01:07:08 PM »
Beautiful Farris wheel. Did you make it from plans? Is it pvc or wood or ? Great job?
Logged

Offline Dabil

  • Jr. Member
  • **
  • Posts: 75
    • View Profile
Re: Ferris Wheel project
« Reply #7 on: March 01, 2017, 03:55:12 PM »
I humbly request a demo video of this in action. That is really cool.

Sent from my SM-G920V using Tapatalk

Logged

Offline babybear

  • Hero Member
  • *****
  • Posts: 540
  • Here to make everyones show better
    • View Profile
Re: Ferris Wheel project
« Reply #8 on: March 01, 2017, 04:00:38 PM »
It is all wood  I do have plans that I drew up.  It runs off a small 12 vdc motor. Later tonight I'll post a video of it running.  My plans is to run it Halloween and x-mas
Logged
JimmyG
Rochester, New York

Offline babybear

  • Hero Member
  • *****
  • Posts: 540
  • Here to make everyones show better
    • View Profile
Re: Ferris Wheel project
« Reply #9 on: March 02, 2017, 04:48:21 AM »
Yesterday I said I would set up a video of this working. Well wish I could have but we lost power in a wind storm here yesterday and still this morning with out power. Ill try again tonight 
Logged
JimmyG
Rochester, New York

Offline ronald

  • Newbie
  • *
  • Posts: 17
    • View Profile
Re: Ferris Wheel project
« Reply #10 on: March 02, 2017, 06:28:53 AM »
Hope your power comes back on soon. Had bad storm's here last night also.

Sent from my SM-G920V using Tapatalk

Logged

Offline babybear

  • Hero Member
  • *****
  • Posts: 540
  • Here to make everyones show better
    • View Profile
Re: Ferris Wheel project
« Reply #11 on: March 02, 2017, 08:28:56 PM »
Well it ended up being a cold night with it being in the 30s out and no power for 14 hours. Tonight I shot some video of the Ferris wheel. I have the lights set to only 30% brightness. Still too much. At the end of the video shows some close up the structure of the wheel. The wheel is sequenced with 2 models. Spinner for the center and a circle for the outer ring.
   I do have an issue when I put a pinwheel effect on the spinner it acts real weird. I have a spinner that I built but had to use a customer model because the arms are different lengths. (width vers height) Oval looking, and the pin wheel effect works great there.
   The design is out of my head but I do have drawings of all parts as I made it. This is made of all mahogany scrap wood from work.     Video as promised..... 
    https://youtu.be/Wih-9vyzIMc
Logged
JimmyG
Rochester, New York

Offline deanathpc

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: Ferris Wheel project
« Reply #12 on: March 03, 2017, 10:54:38 AM »
Well folks I saw this in person.  In action.  W.O.W.  Just wow!  Pictures and video are one thing.  In person is just amazing.  I bow down and am not worthy!  Talent right here!
Logged

Offline JonB256

  • Hero Member
  • *****
  • Posts: 832
    • View Profile
    • My Christmas Website
Re: Ferris Wheel project
« Reply #13 on: March 03, 2017, 01:34:20 PM »
And it was babybear's birthday just a few days ago.
Logged
Pages: [1]   Go Up
« previous next »