universe problems with pixlite

[marc]

can anyone tell me how to get 1024 ch or 2 universe on pixlite 16 as it has  function to connect 1024 per channel b


 please help cheers marc

[Phrog30]

Why don't you post xlights setup and pixlite setup. Without that it's hard to help.

Sent from my Pixel using Tapatalk

[marc]

can anyone solve this problem please help  last 26 nodes diffrent color .
this is my set up pixel tree 8x 25 string = 600 ch  5v 1903 on pixlite 16 controller with latest xlights software v 2017.6 the problem is the last string about 26 nodes in are different color eg i select red and they are all red accept the last 26 or so they are green but still work in a pattern but if i run 7 strings it is fine .iv used individual start ch and non start /iv also selected in channel start manual universe 2 after the 7th string but still the same problem here are the settings im using   LAYOUT

                                             Bottom/top ratio              2                          setup    E131 Multicast 32 universes
                                             perspective                      2
                                             #string                            8
                                             nodes/string                     25
                                             strands/string                    1
                                             start location                   bottom left
                                             individual start                  0
                                             start channel                     1

          also for inv start channels are          string 1=1  string 2=76  string 3=151  string 4=226 string 5=301
                                                                string 6= 376  string 7= 451 string 8= 526

but still have diffrent colors in the last 26 even if i change the string to universe 2 number 1 start

controller set up is advatek 16    seting are pixel ic =ucs1903 or ws2811  RGB 
                                                                 control = advance mode=
                                start         start           End        End       Num   Null   zig zag     Group     intensity  reverse
                              univesre    Channel   universe   channel   pix                                              limit

     OUTPUT 1             1                 1              2            510       340    0        25           0           100         off
     OUTPUT 2             3                 1              4            510       340    0        25           0           100         off
     OUTPUT 3             5                 1              6            510       340    0         0            0           100         off
     OUTPUT 4             7
     OUTPUT 5
     OUTPUT 6
     OUTPUT 7
     OUTPUT 8
         .......
     OUTPUT 16                           

[Phrog30]

I'm having a hard time reading what you pasted. A screenshot is a lot easier on your end and easier for us to read.

The only thing I was able to notice was the last zigzag value is different than the rest. Maybe someone else will have more insight.

Plus, where is your xlights setup?

Sent from my Pixel using Tapatalk

[Boof63]

if using win10, use the "snipping tool", enter this is in bootm l;eft text box and search will find it.
 built in app. use this to get screen shot abd then paste onto the forum.
cheers Boof63