Setting up Mega tree channel numbers.

[mt2525]

Moving over from Vixen and the way my 16 strand, 50 pixels per strand mega tree ... except strands 15 and 16 ...is configured is this....using a sandevices 682.... ports 1-12 set for 50 pixels per strand and ports 13-16 set for 100 pixels per strand because strands 15 and 16 feed my star on top of tree. Strand 15 first 50 pixels for leg 15 and second 50 pixels to outer star and strand 16 feeds first 50 for leg 16 and 50 for middle and inner star... middle star...30 nodes and inner star 20 nodes. To get this to work in vixen I set up legs 13 and 14 to have the first 50 pixels for each leg and second 50 as blank.
Strands 1-12.. channels 1-1800
Strand 13..... ..channels 1801-1950
                      1951-2100 blank
Strand 14....... channels 2101-2250
                       2251-2400.....blank
Strand 15........channels 2401-2550
Outer Star.......channels 2551-2700
Strand 16........channels 2701-2850
Middle Star......channels 2851-2940
Inner Star........channels 2941-3000

Now the question is how do I configure this in x-lights?
Thanks for any input...

[Gilrock]

It's super simple.

1)  Drop a Tree model.
2)  Change Type to Ribbon.
3)  Make sure Start Channel is 1.
4)  Click the Indiv Start Chans checkbox
5)  Change string 14, 15, and 16 to start at 2101, 2401, and 2701.
6)  Drop a Star model.
7)  Change # String to 2 and Nodes should be 50.
  For Layer Sizes type 50,30,20
9)  Click the Indiv Start Chans checkbox.
10) Set string 1 to 2551 and string 2 to 2851.

See photo for result.

[mt2525]

Thanks and I'm sure there will be more questions down the road.