Author Topic: Extra 12 channels  (Read 942 times)

Offline sulrich

  • Newbie
  • *
  • Posts: 19
    • View Profile
Extra 12 channels
« on: November 21, 2017, 06:00:55 AM »
(xLights 2017.37)

Good Morning Folks, Last night i was updating my controllers and channels and see a discrepancy between the "Export Models" csv file and what the setup tab reflects.. I have don this before but never seen this... Why do i think its an issue, i have 3 consecutive models, all identical. first model starts on the right channel and ends on the right channel. Number 2 starts on the right channel, but ends with an extra 12 channels. model 1 has 9 universes,One to Eight at 512, and entry nine at 62. model 2 setup identical, 8@512, and 1@62..but it ends with an extra 12 channels.

Completely baffled to where these extra channels come from?????

Offline Gilrock

  • Supporting Member
  • Hero Member
  • *
  • Posts: 6946
    • View Profile
Re: Extra 12 channels
« Reply #1 on: November 21, 2017, 06:55:20 AM »
Just pick one model that's wrong and show screenshots of everything involved with its channel setup in both xLights and the controller.

Offline sulrich

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Extra 12 channels
« Reply #2 on: November 21, 2017, 05:14:20 PM »
so if you look there are 3 identical models, MidTree1,2,3, each has 2 candy canes, quantity of channels are the same, side by side, but the setup page reflects midtree2, star, and 2 candy canes starts correct, but ends 12 channels to many any insight is appreciated

Offline Gilrock

  • Supporting Member
  • Hero Member
  • *
  • Posts: 6946
    • View Profile
Re: Extra 12 channels
« Reply #3 on: November 21, 2017, 06:17:32 PM »
Check your start channel assignment for lg_candycane_03.  It's showing as 31840 when it should be 31852.

Offline sulrich

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Extra 12 channels
« Reply #4 on: November 22, 2017, 06:36:02 AM »
Check your start channel assignment for lg_candycane_03.  It's showing as 31840 when it should be 31852.

Gill,
Thank you, a second set of eyes sees everything!
I stared at those numbers and had check for overlapping but didnt see it.
Have a Happy Thanksgiving!
Thanks again,
Steve

Offline Gilrock

  • Supporting Member
  • Hero Member
  • *
  • Posts: 6946
    • View Profile
Re: Extra 12 channels
« Reply #5 on: November 22, 2017, 07:10:36 AM »
So I take it when you checked for overlapping you didn't use our built-in feature Tools -> Check Sequence.  Now there are times when overlaps are on purpose so its only a warning.

Offline sulrich

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Extra 12 channels
« Reply #6 on: November 27, 2017, 07:48:21 AM »
So I take it when you checked for overlapping you didn't use our built-in feature Tools -> Check Sequence.  Now there are times when overlaps are on purpose so its only a warning.

I could have swore that it was on when i ran through the channels.
I know that it found a few overlaps with the check box.
Apologies for my oversight, but i'm extremely thankful for your insight.