Controller Upload Question

[mmais]

I have an AlphaPix controller that I want to upload to FPP, I have everything configured. When I go to my setup right click on the controller I get the following options:
E1.31 input definition or output
Which on should I use for this controller?
Then under E1.31 I get these options:
FPP Bridge
Falcon
 SanDevices
Under Output I get these options:
Falcon
Pixlite
SanDevice
J1SYS
Which would I use?
Thanks Mike

[keithsw1111]

Ummm your question does not really make sense.

First of all we don’t have an upload to the alpha pix

Second we do have an upload to fpp to configure it to send data to your alpha pix but you access that via the tools fpp connect menu.


Sent from my iPhone using Tapatalk

[mmais]

You have to upload the AlphaPix controller to the FPP. When I go to upload the controller & Right click on the controller You will see all the above stated options.
My question is which one do I use??
Mike

[keithsw1111]

You have to upload the AlphaPix controller to the FPP. When I go to upload the controller & Right click on the controller You will see all the above stated options.
My question is which one do I use??
Mike

Suggest you go back and reread my response.


Sent from my iPhone using Tapatalk

[mmais]

Guess the old man needs new glasses. I got it uploaded.
My fault for the problem.
Mike