Author Topic: Visualize Controllers  (Read 727 times)

Offline dkuntz

  • Newbie
  • *
  • Posts: 19
    • View Profile
Visualize Controllers
« on: March 04, 2020, 07:30:41 PM »
Using 20.8. I have a couple props that span multiple controllers, one 5 controllers and one 3. Both cases the 1st and last controllers visualize as expected but the "in between" controllers show nothing. Not sure if this spanning situation is supported so not sure if this a bug or just not supported. Wouldn't set it up this way if I built the props now but the matrix was done before Falcon and other newer controllers existed. Files attached just in case. Was hoping "cleanup" was going to be relatively easy but between my "goofs", polylines with multiple ports, this spanning thing, colorlight required changes, usb dmx required changes and dmx via falcon required changes leaving un-managed stuff seems perhaps the better option at this time.

Offline Gilrock

  • Supporting Member
  • Hero Member
  • *
  • Posts: 6946
    • View Profile
Re: Visualize Controllers
« Reply #1 on: March 05, 2020, 03:56:09 AM »
Keith will probably be the one to investigate.  Only thing I'd add is it might help if you provide the original layout before conversion so that he can test the upgrade logic.

Offline dkuntz

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Visualize Controllers
« Reply #2 on: March 05, 2020, 05:38:36 AM »
Attached pre-conversion files.

Offline keithsw1111

  • Administrator
  • Hero Member
  • *****
  • Posts: 2733
    • View Profile
    • Kellyville Christmas Lights
Re: Visualize Controllers
« Reply #3 on: March 05, 2020, 10:08:41 AM »
Visualise has never supported models spanning controllers.

Offline jem5136

  • Jr. Member
  • **
  • Posts: 52
    • View Profile
    • Lights of the Night
Re: Visualize Controllers
« Reply #4 on: March 05, 2020, 04:13:43 PM »
I'm having the same issue.