OK, went back and created new effect, nothing fancy, Effect 1, On, Effect 2 off. Entire effect is below. Seems like a lot, is there a simpler command? Can I just type it in? Effect one is a dim purple with a few sparkles.
1,ID_CHECKBOX_LayerMorph=0,ID_SLIDER_SparkleFrequency=171,ID_SLIDER_Brightness=49,ID_SLIDER_Contrast=0,ID_SLIDER_EffectLayerMix=0,E1_SLIDER_Speed=1,E1_TEXTCTRL_Fadein=0.00,E1_TEXTCTRL_Fadeout=0.00,E1_CHECKBOX_FitToTime=1,E1_CHECKBOX_OverlayBkg=1,E1_SLIDER_Eff_On_Red=41,E1_TEXTCTRL_EFF_ON_RED=41,E1_SLIDER_Eff_On_Grn=0,E1_TEXTCTRL_EFF_ON_GRN=0,E1_SLIDER_Eff_On_Blu=79,E1_TEXTCTRL_EFF_ON_BLU=79,E1_BUTTON_Palette1=#FF0000,E1_CHECKBOX_Palette1=0,E1_BUTTON_Palette2=#00FF00,E1_CHECKBOX_Palette2=0,E1_BUTTON_Palette3=#0000FF,E1_CHECKBOX_Palette3=0,E1_BUTTON_Palette4=#FFFF00,E1_CHECKBOX_Palette4=0,E1_BUTTON_Palette5=#FFFFFF,E1_CHECKBOX_Palette5=0,E1_BUTTON_Palette6=#000000,E1_CHECKBOX_Palette6=0,E2_SLIDER_Speed=1,E2_TEXTCTRL_Fadein=0.00,E2_TEXTCTRL_Fadeout=0.00,E2_CHECKBOX_FitToTime=0,E2_CHECKBOX_OverlayBkg=0,E2_BUTTON_Palette1=#FF0000,E2_CHECKBOX_Palette1=1,E2_BUTTON_Palette2=#00FF00,E2_CHECKBOX_Palette2=0,E2_BUTTON_Palette3=#0000FF,E2_CHECKBOX_Palette3=0,E2_BUTTON_Palette4=#FFFF00,E2_CHECKBOX_Palette4=1,E2_BUTTON_Palette5=#FFFFFF,E2_CHECKBOX_Palette5=0,E2_BUTTON_Palette6=#000000,E2_CHECKBOX_Palette6=0
Turn off lights at end is not checked nor are the other LMS boxes when converting to fseq format. On the FPP First/last not checked. The "flash" is not as obvious now, but it does go dim very quickly at the end of the sequence, i'm thinking like a tenth of a second. Not the end of the world but would be nice to not have it.