Uploading configurations from xlights to F16V3 and remote-FPPs

[disney]

Hi all,

I am having a bit of a struggle in auto configuring my FPPs.

My setup is:
- F16V3
- FPP-master (plays sequence and should have the F16V3 universes)
- 2x FPP (remotes) both running 2 ports of ws2811s

I have setup the F16V3 and 2xFPPs in xlights/controllers and the "upload outputs" works like a charm.

Then I want to upload the configuration into the FPP-master, which I do via FPP connect.
I select UDP-out = all and press upload.

Now the problem:

In the FPP master, in the E1.31 tab, I have three entries, for 2x FPP and the F16V3, where I only expected the latter... when I did it all manually (last year ) I never had to add the FPPs (remotes)

Hope you get the problem and have a solution

tnx
Denie

[dkulp]

For those controllers, in the properties, set the "Active" field to "xLights Only". 

[disney]

Thank you very much, that did the trick!