« previous next »
Pages: [1]   Go Down

Author Topic: P10 Matrix  (Read 2618 times)

Offline Chris

  • Newbie
  • *
  • Posts: 15
    • View Profile
P10 Matrix
« on: January 21, 2016, 06:59:02 AM »
Hi .

I am looking at building a P10 matrix this year but i have no idea on how these work?

Do i just create it as a normal model? How do they connect to the computer?

Thanks

Chris
Logged

Offline kevinp

  • Sr. Member
  • ****
  • Posts: 373
    • View Profile
Re: P10 Matrix
« Reply #1 on: January 21, 2016, 08:16:33 AM »
You'll need...

Beaglebone Black or Green running FPP
Octoscroller cape
P10 panels (up to 64 per Beaglebone)
Power supply

Check out the Falcon forum for a lot more information too.
http://falconchristmas.com/forum/index.php

Within xLights you will create a matrix model like you would any other model and sequence as normal.  Make sure to set up the proper number of channels within the set up tab.
Logged
Kevin Pankratz
Blaine MN

Offline big_dog_501

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: P10 Matrix
« Reply #2 on: January 31, 2016, 04:15:53 PM »
Can I get more info about this?  How are P10 panels configured on the setup tab?  How are models made with these panels?
Logged

Offline cjaqua

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: P10 Matrix
« Reply #3 on: January 31, 2016, 08:26:55 PM »
A good write up on how to configure a p10 matrix can be found at the link below. The only thing I would add is its possible to put the BBB in bridge mode so you can just drop effects onto your sequence in Xlights to preview them on the p10 matrix without having to upload the .fseq file to the BBB.

http://www.diychristmas.org/wiki/index.php?title=Building_an_Octoscroller_Matrix_Display
« Last Edit: January 31, 2016, 08:55:31 PM by cjaqua »
Logged
Pages: [1]   Go Up
« previous next »